Plastic Ball Transfer Units for Light-Duty Applications
Switch measurements:
| Part | Load (lb)Load (kg) | Weight | BALL ⌀ ″Ball Ø (mm) | A | B | C | D | E | $ from |  Files |  |
|---|---|---|---|---|---|---|---|---|---|---|---|
| LP15 | 15 7 | 0.021 0.010 | 5/8" 15 | 0.945 24 | 0.315 8 | 0.188 4.8 | 1.181 30 | 0.787 20 | $34.51 | PDF Step | |
| LP15-C | 15 7 | 0.021 0.010 | 5/8" 15 | 0.984 - 1.004 25 - 25.5 | 0.326 8.3 | 0.188 4.8 | 1.181 30 | 0.787 20 | $36.57 | ||
| LP15-K | 15 7 | 0.021 0.010 | 5/8" 15 | 0.984 - 1.004 25 - 25.5 | 0.326 8.3 | 0.188 4.8 | 1.181 30 | 0.787 20 | $35.83 | ||
| LP22 | 22 10 | 0.078 0.035 | 7/8" 22 | 1.417 36 | 0.386 9.8 | 0.177 4.5 | 1.772 45 | 1.203 30.5 | $45.54 | PDF Step | |
| LP22-C | 22 10 | 0.078 0.035 | 7/8" 22 | 1.456 - 1.464 37 - 37.2 | 0.398 10.1 | 0.177 4.5 | 1.772 45 | 1.201 30.5 | $47.92 | ||
| LP22-K | 22 10 | 0.078 0.035 | 7/8" 22 | 1.457 - 1.476 37 - 37.2 | 0.398 10.1 | 0.177 4.5 | 1.772 45 | 1.203 30.5 | $46.84 | ||
| LP30 | 33 15 | 0.144 0.065 | 1 3/16" 30 | 1.772 45 | 0.543 13.8 | 0.228 5.8 | 2.165 55 | 1.457 37 | $64.67 | PDF Step | |
| LP30-C | 33 15 | 0.144 0.065 | 1 3/16" 30 | 1.812 - 1.831 46 - 46.5 | 0.555 14.1 | 0.228 5.8 | 2.165 55 | 1.457 37 | $66.72 | ||
| LP30-K | 33 15 | 0.144 0.065 | 1 3/16" 30 | 1.812 - 1.831 46 - 46.5 | 0.555 14.1 | 0.228 5.8 | 2.165 55 | 1.457 37 | $65.99 | ||
| LP45 | 45 20 | 0.402 0.182 | 1 3/4" 45 | 2.441 62 | 0.748 19 | 0.335 8.5 | 2.953 75 | 2.106 53.5 | $117.99 | PDF Step | |
| LP45-C | 45 20 | 0.402 0.182 | 1 3/4" 45 | 2.480 - 2.500 63 - 63.5 | 0.760 19.3 | 0.335 8.5 | 2.953 75 | 2.106 53.5 | $0.00 | ||
| LP45-K | 45 20 | 0.402 0.182 | 1 3/4" 45 | 2.480 - 2.500 63 - 63.5 | 0.760 19.3 | 0.335 8.5 | 2.953 75 | 2.106 53.5 | $119.30 | ||
| LP15A | 15 7 | 0.059 0.027 | 5/8" 15 | 0.945 24 | 0.315 8 | 0.188 4.8 | 1.181 30 | 0.787 20 | $38.63 | PDF Step | |
| LP15A-C | 15 7 | 0.059 0.027 | 5/8" 15 | 0.984 - 1.004 25 - 25.5 | 0.326 8.3 | 0.188 4.8 | 1.181 30 | 0.787 20 | $40.68 | ||
| LP15A-K | 15 7 | 0.059 0.027 | 5/8" 15 | 0.984 - 1.004 25 - 25.5 | 0.326 8.3 | 0.188 4.8 | 1.181 30 | 0.787 20 | $39.95 | ||
| LP22A | 22 10 | 0.110 0.050 | 7/8" 22 | 1.417 36 | 0.386 9.8 | 0.177 4.5 | 1.772 45 | 1.203 30.5 | $56.14 | PDF Step | |
| LP22A-C | 22 10 | 0.115 0.052 | 7/8" 22 | 1.457 - 1.476 37 - 37.2 | 0.398 10.1 | 0.177 4.5 | 1.772 45 | 1.203 30.5 | $58.19 | ||
| LP22A-K | 22 10 | 0.115 0.052 | 7/8" 22 | 1.457 - 1.476 37 - 37.2 | 0.398 10.1 | 0.177 4.5 | 1.772 45 | 1.203 30.5 | $57.47 | ||
| LP30A | 33 15 | 0.384 0.174 | 1 3/16" 30 | 1.772 45 | 0.543 13.8 | 0.228 5.8 | 2.165 55 | 1.457 37 | $70.15 | PDF Step | |
| LP30A-C | 33 15 | 0.384 0.174 | 1 3/16" 30 | 1.812 - 1.831 46 - 46.5 | 0.555 14.1 | 0.228 5.8 | 2.165 55 | 1.457 37 | $72.22 | ||
| LP30A-K | 33 15 | 0.384 0.174 | 1 3/16" 30 | 1.812 - 1.831 46 - 46.5 | 0.555 14.1 | 0.228 5.8 | 2.165 55 | 1.457 37 | $71.47 | ||
| LP45A | 45 20 | 1.102 0.500 | 1 3/4" 45 | 2.441 62 | 0.748 19 | 0.335 8.5 | 2.953 75 | 2.106 53.5 | $84.14 | PDF Step | |
| LP45A-C | 45 20 | 1.113 0.505 | 1 3/4" 45 | 2.480 - 2.500 63 - 63.5 | 0.760 19.3 | 0.335 8.5 | 2.953 75 | 2.106 53.5 | $54.86 | ||
| LP45A-K | 45 20 | 1.113 0.505 | 1 3/4" 45 | 2.480 - 2.500 63 - 63.5 | 0.760 19.3 | 0.335 8.5 | 2.953 75 | 2.106 53.5 | $85.46 |
- Light duty ball transfer unit, machined acetal (POM) plastic housing. Can be fitted with either Acetal (POM) balls or AISI 316 stainless steel balls (add suffix ‘A’).
- Resists salt water & chemical attack.
- Non conductive & non magnetic.
- Suited to antimicrobial applications.
- Optional fixing clips & rings. Spring steel ‘K-clips’ & ‘C-clips’/tolerance rings in stainless steel.
- Fully plastic units.
Low Friction1 : 0,03
Speed1m/sec
Temperature-20/+80ºC
Orientation Horizontal / Up
Economy & Value K & C Type Clips
- Fixing clips compensate for irregularities in bore and diameter.
- Ideal where only single-sided access of mounting surface is reachable.
| Light Duty | Part | BORE Ø MIN - MAX | A | $ from | Files | |
|---|---|---|---|---|---|---|
| LP15 | K15 | 0.984 - 1.004 25.0 - 25.5 | 0.945 24 | $1.37 | ||
| LP15 | C15 | 0.976 – 0.984 24.8 - 25.0 | 0.945 24 | $2.16 | ||
| LP22 | K22 | 1.457 - 1.476 37.0 - 37.5 | 1.417 36 | $1.60 | ||
| LP22 | C22 | 1.457 - 1.465 37.0 - 37.2 | 1.417 36 | $2.48 | ||
| LP30 | K30 | 1.811 - 1.831 46.0 - 46.5 | 1.772 45 | $2.22 | ||
| LP30 | C30 | 1.823 - 1.839 46.3 - 46.7 | 1.772 45 | $3.38 | ||
| LP45 | K45 | 2.480 - 2.500 63.0 - 63.5 | 2.441 62 | $3.12 |
Optimal Retantion ≥ 3mm
- Fit clip to mounting bore.
- Push ball unit though clip.
- Peripheral tags expand & grip the ball unit.
K-clip Spring Steel
C-clip Stainless Steel
Other clips available.
Tolerance Rings
- Compensate for irregularities in bore & diameter.
- Ideal where only single-sided access of mounting surface is reachable.
| Light Duty | Part | A | BORE Ø MIN - MAX | B | $ from | Files | |
|---|---|---|---|---|---|---|---|
| LP15 | TR24 | 0.945 24 | 1.010 - 1.020 25.65 - 25.90 | 0.591 15 | $1.18 | ||
| LP22 | TR36 | 1.417 36 | 1.488 - 1.496 37.80 - 38.00 | 0.472 12 | $1.84 | ||
| LP30 | TR45 | 1.772 45 | 1.843 - 1.850 46.80 - 47.00 | 0.591 15 | $1.92 | ||
| TR60 | 2.362 60 | 2.445 - 2.453 62.10 - 62.30 | 0.787 20 | $2.38 |
Can’t find what you’re looking for?
Try searching for key-words, part numbers, load, fixing types.
WhatsApp
Schedule a call