Fixing Clips
- Fixing clips compensate for irregularities in bore and diameter.
- Ideal where only single-sided access to the mounting surface is reachable.
- Fit clip to mounting bore.
- Push ball unit though clip.
- Peripheral tags expand & grip the ball unit.
K-clip Spring Steel
C-clip Stainless Steel
| Light Duty | Medium Duty | Clip | Bore Ø MIN / MAX | A | $ from |  Files |  |
|---|---|---|---|---|---|---|---|
| M12 | MI12 | K12 | 0.905 - 0.925 23.0 - 23.5 | 0.866 22 | $3.57 | |||
| L15 | LP15 | M14 | M15 | MI15 | MG15 | K15 | 0.984 - 1.004 25.0 - 25.5 | 0.945 24 | $2.09 | ||
| L15 | LP15 | M14 | M15 | MI15 | MG15 | C15 | 0.976 – 0.984 24.8 - 25.0 | 0.945 24 | $3.31 | ||
| L22 | LP22 | M22 | MI22 | MG22 | K22 | 1.457 - 1.476 37.0 - 37.5 | 1.417 36 | $2.45 | ||
| L22 | LP22 | M22 | MI22 | MG22 | C22 | 1.457 - 1.465 37.0 - 37.2 | 1.417 36 | $3.79 | ||
| L30 | LP30 | M30 | MI30 | MG30 | MV30 | MX30 | MW30 | K30 | 1.811 - 1.831 46.0 - 46.5 | 1.772 45 | $3.41 | ||
| L30 | LP30 | M30 | MI30 | MG30 | MV30 | MX30 | MW30 | C30 | 1.823 - 1.839 46.3 - 46.7 | 1.772 45 | $5.17 | ||
| L45 | LP45 | M45 | MI45 | MG45 | MX45 | MW45 | K45 | 2.480 - 2.500 63.0 - 63.5 | 2.441 62 | $4.79 |
Adding the suffix K or C to the ball unit part number will specify the supply of the optional clip (eg L22K or L22C). When using fixing clips, fit the clip to the bore and push the ball unit through the clip. Peripheral tags expand and securely retain the ball unit.
Dimensions A and B change to A* and B* when using clips.
Tolerance ring and full clip options are shown on page 15 of the catalogue.
Tolerance Rings
- Compensate for irregularities in bore & diameter.
- Ideal where only single-sided access of mounting surface is reachable.
| Heavy Duty | Light Duty | Medium Duty | Part | BORE Ø MIN - MAX | A | B | $ from | Files | |
|---|---|---|---|---|---|---|---|---|---|
| MG8 | TR18 | 0.760 - 0.770 19.30 - 19.55 | 0.709 18 | 0.236 6 | $1.61 | ||||
| 8000 | 8001 ❋ | MI12 | MG12 | M12 | TR20 | 0.858 - 0.868 21.80 - 22.05 | 0.787 20 | 0.472 12 | $1.61 | |||
| 8010 ❋ | M12 | MI12 | MG12 | TR22 | 0.937 - 0.947 23.80 - 24.05 | 0.866 22 | 0.472 12 | $2.72 | |||
| 8020 ❋ | 8300 ❋ | 8310 ❋ | L15 | LP15 | M14 | M15 | MI15 | MG15 | TR24 | 1.010 - 1.020 25.65 - 25.90 | 0.945 24 | 0.591 15 | $1.80 | ||
| 8500 ❋ | 8501 ❋ | 8601 ❋ | TR25 | 1.071 - 1.081 27.20 - 27.45 | 0.984 25 | 0.315 8 | $2.97 | ||||
| L22 | LP22 | M22 | MI22 | MG22 | MM22 | TR36 | 1.488 - 1.496 37.80 - 38.00 | 1.417 36 | 0.472 12 | $3.14 | |||
| 9020 ❋ | 9021 ❋ | 9022 ❋ | 9320 ❋ | 9321 ❋ | L30 | LP30 | M30 | MI30 | MG30 | MM30 | MV30 | MX30 | MW30 | TR45 | 1.843 - 1.850 46.80 - 47.00 | 1.772 45 | 0.591 15 | $3.27 | ||
| 9031 ❋ | 9330 | 9520 ❋ | TR50 | 2.043 - 2.051 51.90 - 52.10 | 1.969 50 | 0.591 15 | $3.62 | ||||
| 9040 | 9041 ❋ | 9042 ❋ | 9341 | MM45 | TR60 | 2.445 - 2.453 62.10 - 62.30 | 2.362 60 | 0.787 20 | $3.62 | |||
| 9530 ❋ | L45 | LP45 | M45 | MI45 | MG45 | MX45 | MW45 | TR62 | 2.531 - 2.539 64.30 - 64.50 | 2.441 62 | 0.787 20 | $1.31 | ||
| 9540 ❋ | 9640 ❋ | TR70 | 2.836 - 2.841 72.35 - 72.55 | 2.756 70 | 0.787 20 | $1.31 | ||||
| 9050 | 9051 ❋ | 9350 | M60 | MG60 | TR100 | 4.085 - 4.096 103.75 - 104.05 | 3.937 100 | 0.866 20 | $4.88 |
Nyloc Nut & Washer + ‘T’ Wood Insert Kits
Use with Heavy Duty 81 & 91 series, Medium Duty MSP series & Omnicaster Ball Casters.
| Heavy Duty | Medium Duty | Omnicaster | Part | A | B | C | D | E | $ from | Files | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8100 | 8101 | MSP10 | MSP12 | MSP15 | MSP19 | OC30 | OC30F |  T8 | 0.875 22.2 | 0.358 9.1 | 0.433 11 | M8 x 1.25 M8 x 1.25 | 0.051 1.3 | $1.37 | ||
| 8100 | 8101 | MSP10 | MSP12 | MSP15 | MSP19 | OC30 | OC30F |  W8 | 0.630 16 | 0.315 8 | 0.063 1.6 | M8 x 1.25 M8 x 1.25 | - | $0.09 | ||
| 8100 | 8101 | MSP10 | MSP12 | MSP15 | MSP19 | OC30 | OC30F |  N8 | 0.567 14.4 | 0.512 13 | 0.315 8 | M8 x 1.25 M8 x 1.25 | - | $0.86 | ||
| OC35 | OC50 | OC55 | OC55B | T10 | 0.984 25 | 0.441 11.2 | 0.516 13.1 | M10 x 1.5 M10 x 1.5 | 0.055 1.4 | $1.91 | ||||
| OC35 | OC50 | OC55 | OC55B | W10 | 0.787 20 | 0.394 10 | 0.079 2 | M10 x 1.5 M10 x 1.5 | - | $0.12 | ||||
| OC35 | OC50 | OC55 | OC55B | N10 | 0.744 18.9 | 0.669 17 | 0.394 10 | M10 x 1.5 M10 x 1.5 | - | $1.06 | ||||
| 9120 | 9123 | 9130 | 9133 | MSP22 | MSP30 | OC100 | OC100B | T12 | 1.063 27 | 0.551 14 | 0.551 14 | M12 x 1.75 M12 x 1.75 | 0.071 1.8 | $2.32 | ||
| 9120 | 9123 | 9130 | 9133 | MSP22 | MSP30 | OC100 | OC100B | W12 | 0.945 24 | 0.472 12 | 0.098 2.5 | M12 x 1.75 M12 x 1.75 | - | $0.16 | ||
| 9120 | 9123 | 9130 | 9133 | MSP22 | MSP30 | OC100 | OC100B | N12 | 0.831 21.1 | 0.748 19 | 0.472 12 | M12 x 1.75 M12 x 1.75 | - | $1.15 |
Service Kits
Omnitrack Heavy Duty 9000 series ball transfers – In continuous production since 1954.
Rapidly restore performance within minutes by using Service Kits S1 & S2 offering 2 levels of components & full overhaul instructions.
Factory reconditioning service for spring loaded & custom units as these may require special tooling for safe disassembly.
To order state original part number, any identification mark & Service Kit required eg S1-9241. If in doubt, contact us & we’ll keep you rolling!
1 – Circlip
2 – Top Cap
3 – Felt Seal
(Ball Ø > 12.7mm)
4 – Main Ball
5 – Recirculating Balls
6 – Retainer
7 – Table
Can’t find what you’re looking for?
Try searching for key-words, part numbers, load, fixing types.
WhatsApp
Schedule a call