Pneumatic Stops

Pneumatic Ball Transfer Units allow air-driven positioning of the conveyed item & may be individually arranged for a flexible, modular conveying plane.

PS25 Positioning Stops are pneumatically activated to stop & hold the position of the conveyed item.

In low pressure systems, tubing length should be extended or altered using optional in-line connectors (TC4) as the tubing & fittings are not designed to be separated once assembled.

Appropriate blanking plugs are automatically supplied with each order.

Alternative ball materials & sizes available for pneumatic stops.

pneumatic stops

PS25
Low pressure

Pneumatic Stops

Switch measurements:

Part	Lift (lb)Lift (kg)	PSIBAR	A	B	C	D	E1 MIN	E2 MIN	F	X	£ from	Files
PS25	20 9	50 3.4	1.563 39.7	0.539 13.7	1.256 31.9	1.850 47	0.591 15	1.457 37	0.1 2.54	0.437 11.1	£37.14	PDF

Accessories

High & low pressure
Regulator Valve

AV6
From £68.72
High & low pressure
3-Way Switch

AS7
From £61.59
Low pressure
Tubing (3m roll)

TP4
From £7.36
Low pressure
Fixing Clip

PF2
From £1.99
High & low pressure
2-Way Switch

AS6
From £48.59
Low pressure
Blanking Plug

TB4
From £2.39

Also consider

Units & rails are all fitted with a T connector for ease of integration. High & low pressure tubing, connectors & end-plugs. Configure together with switches & regulators to provide versatile control.

Pneumatic Ball Transfers, Stops, Linear Rollers & Rails

Pneumatic Ball units allow air-driven positioning of conveyed item & may be individually arranged for a flexible, modular conveying plane.
PS25 positioning stops are pneumatically activated to stop & hold the position of the conveyed item.
Units rated with a maximum air supply pressure of ≤3.4 bar support loads of up to 200 Kgs/rail, whilst those rated at ≤6 bar air supply support up to 2500 Kgs/rail.

Can’t find what you’re looking for?

Try searching for key-words, part numbers, load, fixing types.

Free technical advice

Phone: +44 1453 873345

Email: info@omnitrack.com

Schedule a call